SEALCOATING AND CRACK FILLING · GREEN BAY AND NORTHEAST WISCONSIN
Asphalt Sealcoating and Crack Filling in Green Bay and Pulaski, WI
Protect your driveway or parking lot from water, sun, salt, and oil for pennies per square foot instead of dollars per square foot to replace it.
Sealcoating Preserves Your Asphalt Investment
Sealcoating is a protective coating applied over sound asphalt to block water, UV oxidation, gas, oil, and salt melt, restore the black color, and add years to the pavement’s life. In Northeast Wisconsin the right schedule is the year after paving, then every 2 to 3 years for driveways and every 2 to 4 years for parking lots. Residential sealcoating typically runs $0.50 to $1.00 per square foot and commercial lots less.
Martiny Paving has been sealcoating in the Green Bay area since 2019 and applies SealMaster 100 percent coal tar sealer as well as asphalt-emulsion sealers, sand-modified for traction and durability, by hand around garages and concrete and by spray on open areas. Cracks are routed and hot-pour sealed first, because sealer protects a surface; it does not fill cracks.
Quick Facts
- Residential: $0.50 to $1.00 per square foot
- First seal: The year after paving
- Repeat: Every 2 to 3 years
- Weather: 50 degrees and rising, 24 hours dry
- Stay off: 24 to 36 hours
- Season: May through October
WHAT IS INCLUDED
What Our Sealcoating Service Includes
- ✔High-powered blowing and wire-broom cleaning of the whole surface
- ✔Oil spot priming
- ✔Crack routing and hot-pour rubberized crack sealing
- ✔Hand application along concrete, garage doors, and edges
- ✔One heavy coat for driveways, two coats for commercial lots
- ✔Sand and latex additives for traction and wear
- ✔Barricades and cure guidance
- ✔Optional line striping after cure
WHY MARTINY PAVING
Why Sealcoating Pays for Itself
Hover or tap each card.
Doubles the Life of Your Asphalt
Blocks Water and Sun
Looks Brand New
Deep Black Again
Cheapest Maintenance There Is
Pennies vs. Dollars
HOW IT WORKS
How We Sealcoat
1. Inspect and Quote
We check for cracks, oil spots, and areas too far gone to seal.
2. Clean and Prep
Blowers, wire brooms, oil spot primer, and crack routing and sealing.
3. Apply
Hand-applied edges, then spray or squeegee coats with sand additive.
4. Cure
24 to 36 hours off the surface, longer in cool or humid weather; no sharp turns for a few weeks.
RECENT WORK
Sealcoating Projects Across Northeast Wisconsin
Driveways, private lanes, and commercial lots, with a few drone views.
Before and After Sealcoating
- ●Move vehicles, planters, and hoses off the surface the day before
- ●Turn off sprinklers for 48 hours
- ●Stay off for 24 to 36 hours, 48 in cool weather
- ●Expect a slightly softer surface for a couple of weeks; avoid sharp stationary turns
- ●Do not seal every year; buildup flakes
- ●Fill cracks every fall between sealcoats
RELATED SERVICES
More Ways We Can Help
Asphalt Patching and Repair
Potholes, alligator cracking, and sunken areas fixed at full depth. Learn more »
Residential Asphalt Services
Everything a homeowner needs from first quote to first sealcoat. Learn more »
Commercial Asphalt Services
Maintenance plans, striping, and repairs for property managers and businesses. Learn more »
Sealcoating Questions, Answered
When should I sealcoat a new asphalt driveway for the first time?
Wait until the year after installation, after the asphalt has cured through a full season. Sealing too early traps the oils that need to work out of new asphalt and leaves a soft, scuff-prone surface. After that, seal every 2 to 3 years.
How often should I sealcoat?
Every 2 to 3 years for driveways and every 2 to 4 years for parking lots, depending on traffic and plowing. Yearly sealing causes buildup that peels; waiting five or more years lets oxidation and water do damage that sealer cannot undo.
Does sealcoating fill cracks?
No. Sealer covers hairline cracks but anything a quarter inch or wider must be routed and hot-pour sealed first. We do both on the same visit, which is why our service is called sealcoating and crack filling.
What weather do you need to sealcoat?
Pavement and air at 50 degrees and rising, no rain for about 24 hours, and ideally a sunny day between May and October. We watch the forecast and reschedule rather than seal into rain.
How long do I stay off the driveway after sealcoating?
24 to 36 hours for vehicles, up to 48 hours in cool or humid weather, and avoid turning the wheel while stopped for a few weeks. Foot traffic is fine after a few hours once the surface is dry to the touch.
How much does sealcoating cost?
Residential driveways typically run $0.50 to $1.00 per square foot, so a 1,000 square foot driveway is usually a few hundred dollars, and commercial lots are priced lower per foot. Crack sealing is billed separately by the linear foot. Call 920-770-5805 or request a free quote.
Have a different question? Call 920-770-5805 or fill out our quote request and Bryce will get back to you.
Ready for a Smooth New Surface?
Tell us what needs paving, where the property is, and when you would like it done. We will help you figure out the right next step, with a free on-site estimate and a written quote.